add wishlist show wishlist remove wishlist add compare show compare remove compare preloader
Golf Range Finder
Golf Range Finder
Golf Range Finder
Golf Range Finder
Golf Range Finder
  • 將圖片載入圖庫檢視器 Golf Range Finder
  • 將圖片載入圖庫檢視器 Golf Range Finder
  • 將圖片載入圖庫檢視器 Golf Range Finder
  • 將圖片載入圖庫檢視器 Golf Range Finder
  • 將圖片載入圖庫檢視器 Golf Range Finder

Golf Range Finder

定價
$27.89 NZD
售價
$27.89 NZD
定價
售罄
單價
每 
內含稅金。

This is a golf observation instrument that uses precision optics and digital technology to measure distance. It is a very safe distance test device.

Functions:
1. GREEN MODE. (Specially designed for golfers)
2. GENERAL MODE. (For general purpose, you can measure the distance between the target and the object after setting the target height.)

Specifications:
Objective lens: 28mm
Eyepiece: 16mm
Resolution: 13 inch
Magnification: 7X
The farthest test distance is 930 yards (1 yard = 0.914 meters)
Visual angle: 7.8 degrees
Power supply: 2 X CR2032 button batteries
Size: approx. 90x50x38mm/3.54x1.96x1.49''

Operation Manual:
1. Press the Adjust/On button to start, the default mode is lawn function.
2. When playing golf:
a. The height (2.6 yards) of the scale is pre-set.
b. Align the bottom line of the screen with the horizontal line of the lawn.
c. The position of the scan line is raised to the top of the golf flagpole press the Adjust/On button.
d. The number will be at the top of the screen, indicating the distance between the ball and the hole.
3. The distance used for measuring special targets:
a. When the function button is pressed, the instrument enters the general function mode, and the screen displays three digits and one decimal point.
b. Press the function button to move to the ten-digit, and then press the Adjust/On button to enter the number, the range is 0 to 9.
c. Repeat the above steps, set the number of bits and below the decimal point.
d. Press the function key to complete the above setting.
e. Depending on the height you enter, the screen will show the minimum distance you can measure.
f. Align the bottom line of the screen with the lowest line of the object.
g. Switch the position of the scan line up to the top of the target by pressing the Adjust/On button.
h. The number will appear at the top of the screen, indicating the distance between you and the target. Please input its height.

Package includes:

1x Ranger Finder